3105 aluminium sheet plate

3105 Aluminium Sheet / Plate

Thickness: 0.5mm-170mm

Width:
Under 2250mm

Length:
Under 11000mm(11m) or by coil


Email: sales@aluminium-sheets.com

Tel & WhatsApp: +86 17719845538

Contact us for free 3105 aluminum alloy samples!

Introduction

Aluminium alloys do not see a decrease in their strength when subjected to extremely low temperatures.Additionally,they have a high degree of adaptability. 3105 Aluminium Sheet / Plate in its purest form makes up 98% of the aluminium alloy. It is resistant to high temperatures, it is simple to weld and it can be moulded without causing any damage to its overall structure.

 

Chemical Components
·Aluminium/Aluminum,Al-99.0% Manganese,Mn-0.55%
·Magnesium,Mg-0.50% Physical Prospects
·Density:2.6-2.8 g/cm3 (0.0939-0.101 lb/in3)
·Melting point:641 C(1185 F)

Mechanical Prospects
·Tensile strength:150 MPa(21755 psi)
·Yield strength:130 MPa(18855 psi)
·Shear strength:97 MPa(1406psi)
·Elastic modulus:70-80 GPa(10153-11603 ksi) Poisson’s ratio:0.33
·Elongation:7%

Machinable
3105 Aluminium Sheet / Plate has machinability that is on par with that of regular materials.However, it is possible to temper it to a harder state than it was inits annealed state, which results in an improvement in its machineability.Oil lubricants are used during the machining of this metal.

Formation
The 3105 aluminium alloy can be easily moulded into several forms.It is recommended that bend radil for annealed H12,H14,and H16 tempers fall somewhere in the region of 1 t to 2 t In order to achieve the H18 temper,bending radii mu st be between 2 and 7t.

Welding
Welding is not a problem for the aluminium/3105 aluminium alloy.The components can be welded to one another using an arc welding technique.

Heat
The aluminium/3105 aluminium alloy does not reactin any way to being heated,with the exception of being cold worked.

Forge
The temperatures required for forging the aluminium/3105 aluminium aloy range between 372.50 degrees Celsius/950.50 degrees Fahrenheit

Working Hot
Hot working of 3105 aluminium alloy is possible at temperatures ranging from 400 to 700 degrees Fahrenheit/205 to 372 degrees Celsius.

Working Cold
In the harsher cold-worked tempers,the cold working capabiliies of the aluminium/3105 aluminium alloy are outstanding.

Annealing
After being heated to 344 degrees Celsius/650 degrees Fahrenheit,the aluminium/3105 aluminium alloy is then allowed to cool off naturally in the air.This process takes about an hour.

Harden
The only way to harden aluminium/3105 aluminium alloy is through the process of cold working in one of four different tempers (H12,14,16, 18, or 25).

Specification

Product Name 3105 aluminum Sheet / Plate
Production Standard ASTM, B209, JIS H4000-2006,GB/T2040-2012,etc
Materiral Temper O,H12,H14,H16,H18,H19,H22,H24,H26,H28,H112
Width 20mm-2650mm or as the customer’s request
Longth customer’s request
Thickness 0.1mm-500mm
Surface Coated, Embossed,Brushed, polished, Anodized,etc
OEM service Perforated, Cutting special size, Doing flatness, Surface treatment,etc
Payterm Ex-work, FOB, CIF , CFR, etc
Payment T/T, L/C, Western Union, etc
Delivery Time Within 3 days for our stock size,15-20days for our production
Package Export standard package: bundled wooden box, suit for all kinds of transport,
or be required
MOQ 1ton
Sample Free and available
Quality Certificate of Test,JB/T9001C,ISO9001,SGS,TVE
Application Wine bottle caps, beverage bottle caps, cosmetic caps, coated rolls, etc.

Applications

Application
In the fabrication of sheet metal,metalworkers frequently use the aluminium/3105aluminium alloy.In addition to that,it is utilised in the production of umbrellas,mobile homes,and siding for residential buildings.

3105 Aluminium Sheet / Plate has also entered large public buildings from industrial buildings, such as railway stations, airport terminals, concert halls, stadiums, theaters, etc The application technology and scope of application of 3105 aluminum alloy are constantly expanding, and the amount of application is also constantly increasing. Its construction method is more scientific and its corrosion resistance is stronger. The roof, floor and wall of the building are made of plates with more reasonable stress and connection, which greatly improves the application technology level of 3105 aluminum alloy

FAQ

Q:Are you trading company or manufacturer ?
A:We are professional manufacturer for Aluminium Alloy,and our company also is a very professional a trade company for Aluminium Alloy.we can also provide a wide range of Aluminum alloy products.

Q:Will you delivery the goods on time ?
A:Yes,we promise to provide best quality products and delivery on time. Honesty is our company’s tenet.

Q:Do you provide samples? is it free or extra ?
A:The sample could can provide for customer with free,but the courier freight will be covered by customer account.

Q:Do you accept the third party inspection ?
A:Yes absolutely we accept.

Q:How could you guarantee your products ?
A:Each piece of products is manufactured by certified workshops,inspected by CLIMB piece by piece according to national QA/QC standard.We also could issue the warranty to customer to guarantee the quality.

Q:How do we trust your company ?
A:We specialise in steel business for years,headquarter locates in Zhengzhou,Henan province.you are welcome to investigate in any ways,by all means,you could place an order in Alibaba with trade assurance which could secure your payment.

Q:How can I get your quotation as soon as possible ?
A:The email and fax will be checked within 24 hours,meanwhile,the Skype,Wechat and WhatsApp will be online in 24 hours.Please send us your requirement and order information,specification(Steel grade,size,quantity,destination port),we will work out a best price soon.

Q: How long can I receive my goods ?
A: It depends on the products you ordered. Generally, it needs 30-40 days.
We have 3200 workers to manufacture aluminium products. We have complete production lines for meeting your needs of products quality and production speed to make sure that our products can get to you faster.

Q: What are your payment methods ?
A: TT or 100% irrevocable L/C at sight.

Q: Are your aluminium products quality reliable ?
A: We apply professional and advanced equipment for processing aluminium products. These equipment are top-class at home and abroad. What’s more, our factory has complete equipment configurations for fine machining. And we have precise equipment for testing products quality. Thus, the quality of end products can be promised.

Shipping& Packaging

Aluminum sheet packaging details

To ensure that the surface of the aluminium sheets/plates is intact without scratches, we will clamp paper and cover film on the aluminium sheets/plates;

The plastic or kraft paper package is used for moisture-proof and rain proof to ensure that the aluminium sheets/plates is clean and free from dirt during transportation;

We add wooden support and reinforce with steel belt to avoid collision during transportation and ensure the shape of aluminium sheets/plates is unchanged;

Export products are all packaged in wooden cases and brackets marked with fumigation;

Aluminium sheet sample post

Before-sale service
We have full stock and can deliver within short time.
OEM and ODM order are accepted, Any kind of logo printing or design are available.
Good Quality + Factory Price + Quick Response + Reliable Service, is what we are trying best to offer you.
All of our products are produced by our professional workman and we have our high-work-effect foreign trade team, you can totally believe our service.

After choose
We will count cheapest shipping cost and make invoice to you at once.
Check quality again, then send out to you at 5-7 working day after your payment.
Email you the tracking no, and help to chase the parcels until it arrive you.

After-sale service
If you have any question, please contact us freely by E-mail or Telephone.
We will reply you within 24 hours and solve your problem asap.

dear-sir

Hi, I'm Bella. I believe you have seen many websites of aluminum merchants, but you haven't chosen yet. I sincerely suggest that you choose to purchase our products. Not only because I work here.

We are different from ordinary trading companies but a professional aluminum plate manufacturer with a production base. You are welcome to visit at any time! And we are a caring team, I believe that cooperation with us will make you satisfied!

Email: sales@aluminium-sheets.com

Mobile/WhatsApp: +86 17719845538

Leave Your Requirement on Climb aluminum alloy products! We Will Reply You In 12 Hours!