5083 Aluminium Coil

5083 Aluminum Alloy Introduction

5083 Aluminium Coil is a non-heat-treatable alloy with high strength, excellent corrosion resistance, and good weldability. It is commonly used in marine applications due to its excellent resistance to seawater and other corrosive environments.
5083 aluminum alloy belongs to the 5xxx series of aluminum alloys, which are composed of aluminum, magnesium, and trace amounts of other elements such as chromium, manganese, and zinc. The addition of magnesium to the alloy provides strength and enhances its corrosion resistance.

5083 Aluminum Alloy Chemical Composition

ELEMENTS	Mg	Si	Iron	Ti	Cu	Mn	Cr	Zn	Others Total	Alu
CONTENT (WT%)	4.0-4.9	≤0.4	0.4	≤0.15	≤0.1	0.4-1.0	0.05-0.25	0.25	0.15	Remain

Typical Mechanical Properties Of 5083 Aluminum Alloy

5083 aluminum alloy Temper	Tensile strength(MPa)	Yield strength(MPa)	Elongation(%)	Brinell hardness
H116	260	125	10	75
H111	270	115	12	70
H32	305	215	12	85
O	195	95	20	50

Applications Of 5083 Aluminum Alloy

5083 aluminium Coil is a versatile material that is used in a wide range of applications due to its high strength, excellent corrosion resistance, and good weldability. Some of the most common applications of 5083 aluminum alloy include:

• Marine applications: Widely used in the marine industry for manufacturing boats, yachts, and other watercraft. Its excellent corrosion resistance makes it ideal for use in seawater and other corrosive environments.
• Aerospace applications: Used in the aerospace industry for manufacturing aircraft components, such as wing skins, fuselage panels, and landing gear parts, due to its high strength-to-weight ratio and good formability.
• Transportation industry: Used in the transportation industry for manufacturing truck and trailer parts, such as tankers and dump bodies, due to its high strength and corrosion resistance.
• Architecture and construction: Used in architecture and construction for manufacturing roofing and siding, as well as for structural components, such as beams and columns, due to its strength and durability.
• Industrial applications: Used in industrial applications, such as pressure vessels, storage tanks, and piping, due to its excellent corrosion resistance and weldability.

5083 aluminium Coil Features

• Excellent corrosion resistance: Excellent resistance to seawater and other corrosive environments, making it ideal for marine and other harsh environments.
• High strength: Has a high strength-to-weight ratio, making it an excellent material for applications that require both high strength and lightweight properties.
• Good weldability: Has good weldability and can be easily welded using conventional welding methods.
• Good formability: Has good formability, allowing it to be easily formed into various shapes and sizes.
• Non-heat-treatable: 5083 aluminum alloy is a non-heat-treatable alloy, which means that its strength cannot be significantly increased through heat treatment.
• Versatile: It is a versatile material that can be used in a wide range of applications, including marine, aerospace, and transportation industries.
• Machinability: Has good machinability, allowing it to be easily machined into precise shapes and sizes.
• Anodizing response: 5083 aluminum alloy has a good anodizing response, allowing it to be easily anodized for enhanced surface protection and aesthetics.

Advantages Of 5083 Aluminum Alloy In Shipbuilding

• Excellent corrosion resistance: Seawater is a highly corrosive environment that can cause damage to ship structures and equipment over time. 5083 aluminum alloy has excellent corrosion resistance, making it ideal for use in marine environments.
• High strength-to-weight ratio: 5083 aluminum alloy has a high strength-to-weight ratio, which means that it is strong and lightweight. This is important in shipbuilding applications because lighter weight structures can help to increase a ship’s speed, reduce fuel consumption and improve overall efficiency.
• Good weldability: Welding is an essential process in shipbuilding, as it allows for the assembly of large and complex structures.
• Good formability: 5083 aluminum alloy has good formability, which allows for the creation of intricate and curved shapes. This is particularly useful in shipbuilding applications, where hulls, decks and other structures often have complex shapes.
• Low maintenance: 5083 aluminum alloy requires minimal maintenance, as it is resistant to corrosion and degradation over time. This makes it an ideal material for use in ship structures, which require regular maintenance and repair.

5083 Aluminum Alloy Market Analysis

The 5083 aluminum alloy market has experienced steady growth in recent years due to the material’s wide range of applications, including marine, aerospace, transportation, architecture, and industrial industries.
The global 5083 aluminum alloy market was valued at approximately USD 965 million in 2020 and is expected to grow at a CAGR of around 6.5% during the forecast period (2021-2026).

5083 Aluminium Coil ,5083 Aluminum Alloy Plate
Standards	ASTM B209 / ASME SB209
Grade	5083,AW-AlMg4,A95086,WNR3.3545
Temper	O, F, H12, H14, H16, H18, H19, H22, H24, H26, H32, H34, H36, H38, H111, H112, H321, T3, T4, T5, T6, T7, T351, T451, T651, T851
Thickness	2~300mm
Length	500~10000mm
Width	500~2500mm
Surface	Bright, polished, hair line, brush, sand blast, checkered, embossed, etching, etc
Finish	Mill, Customer specific finish
Proof Stress	125 Min MPa
Tensile Strength	275-350 MPa
Hardness Brinell	75 HB
Types of Packaging	– Bundles (hexagonal)
	– Wooden Boxes
	– Crates (steel/wooden)
	– Packaging for Aluminium 5086 Sheets as per customer’s requirements
Advantages	– High Strength
	– Resistant High Mechanical Stresses
	– Resistant to High Temperature
	– Good Formality